Bowie, MD Air Conditioning, Heating and Plumbing Services

Home / Bowie, MD Air Conditioning, Heating and Plumbing Services

Bowie, MD Air Conditioning, Heating and Plumbing Services

Supreme Air provides Air Conditioning, Heating and Plumbing Services, Repair, Installation, Maintenance, and Tune Up in Bowie, MD and surrounding areas.

Check out what some of our customers are saying about Supreme Air.

Local Reviews
for Bowie, MD


Yonas M.

Yonas M.

Tuneup special on arrival set unit to both heating and cooling modes measured supply and return air temp measured voltage and amps inspected electrical connections checked drain and cleaned checked filter and replaced I sanded the flame rectification probe and checked burner agreement the ignitor homes out to be in good condition all other electrical connections in side the furnace. In cooling mode measured supply and return air temp measured voltage and amps inspected electrical connections checked condenser coil checked compressor capacitor measured pressure and temp and they are ideal indicating zero leaks unit operating normal at this time. Recommended duct cleaning& uv lights installation &Ez trap and condenser coil cleaning customer sign new service agreement I collected $199 for hole year payment on C.C

Near Landsdales Hope Way, Bowie, MD 20720
Marc M.

Marc M.

Upon arrival found water leak coming from upstairs through walls because it over flowing out the drain for the washer box. Will run bio-clean down line and test function. Clog got worst due to it being further down the line will need to cut into line and snake closer to the stack connection.

Near Erion Ct, Bowie, MD 20721
Joseph.Wade@supremeairllc.com

Joseph.Wade@supremeairllc.com

Installation of Carrier Heat Pump Outside MN# 38MGR Inside X 3 MN# 40MAQ Total Job $9966.00

Near Cambridge Ct, Bowie, MD 20715
ALEX K.

ALEX K.

Installation of Carrier Heat Pump Outside MN# 38MGR Inside X 3 MN# 40MAQ Total Job $9966.00

Near Cambridge Ct, Bowie, MD 20715
Colin T.

Colin T.

Upon arrival I was told condensate Pump was running erratically yesterday, customer unplugged and now unit not running at all, no power at thermostat. During diagnostics I found system shut down because condensate pump was full and safety opened switch. Plugged back in and pump rejected all water but float never closed the contact and pump never shut off. Removed top to find a lot of growth inside, blocking inlets to pump and also blocking float. The internal motor mount is broken and not secured, not letting normal operation occur. Quoted customer to replace pump and he approved. Replaced and tested system. Customer said he has been having a hard time scheduling maintenance so I inspected system to see if I had any other recommendations. No additional issues found with geo system but unit is located in crawl space and I found evidence of standing water in space. Mentioned to customer because it may be coming from rain water.

Near Church Rd, Bowie, MD 20720
Joseph.Wade@supremeairllc.com

Joseph.Wade@supremeairllc.com

Replace mixing valves for 2 sinks in the men's restroom and 2 sinks in the ladies restroom.

Near Martin Luther King Jr Hwy, Bowie, MD 20720
Youssef  D.

Youssef D.

Valve stem, 3 comp. sink, diag. scalding water Estimate to replace hot water valve stem on kit. hand sink, replace 3 drain stoppers on 3 comp. kit. sink. To perform additional diagnostic on ongoing issue with scaffolding water at bathroom sink, will provide additional estimate for repairs.

Near Martin Luther King Jr Hwy, Bowie, MD 20720
Youssef  D.

Youssef D.

Replace trap and tail piece underneath hand sink and dining area need hot water stem hand sink in kitchen area need rebuild or replace stoppers on 3Com sink in kitchen area need tall ladder and business closed in order to open cieling tiles and trace mixed hot water line to find out why mixing valve is not controlling hot water too hand sinks hand sink water is 150 degrees

Near Martin Luther King Jr Hwy, Bowie, MD 20720
Christopher A.

Christopher A.

Materials Used: 1) Honeywell remote indoor temperature sensor Upon my arrival I met with the manager. They showed me the thermostats and explained that the ac was constantly running in most of the restaurant but would not run in the kitchen/ office area. There was no issue with thermostat #3. It was replaced with a red link remote temperature sensor. I quickly found out thatthe remaining 3 tstats were setup to read temperature at the tstat. I reset them to read from a sensor because all 3 areas had remote sensors. It took a little diagnostic work to figure out that tstats #1 & #2 bar and kitchen had been accidentally swapped. I confirmed this by setting #2 the bar tstat on its proper base, let it read the temperature from the sensor then I went and removed the wires to the sensor and it quit reading temperature. Once I had the office tstat on the correct sub base I reset it to read temperature at the tstat because it did not have a remote sensor. Ac began to operate in the kitchen/

Near Martin Luther King Jr Hwy, Bowie, MD 20720
Yonas M.

Yonas M.

Service call on 05/11/19 On arrival set units to call for cooling nothing comes on checked the outdoor unit is not running I found error codes LPS logouts I reset the unit the compressor comes on I put my gauge both line set line set # 2 it was low pressure 25psi is R22 low freon I put 28Lbs is the unit but the unit utilities take 80Lbs I put 2 jugs whatever I have in my truck the pressure is going up to 42psi R22 side but still is not enough the unit has leak is going to back out very soon I checked electrical connections measured ENT and LVG temp on condenser coil for now the unit operating normal at this time . Office collected the payment.

Near Laurel Bowie Rd, Bowie, MD 20715
Colin T.

Colin T.

Performed ac tune up for customer. Filter is clean. Flushed out drain pan, line, trap. Rust building up, informed customer to check for nw water spots when changing filter. Pan is currently not leaking but rust is building up and could potentially leak in the future. Checked cleanliness of coils and blower. Found vine growing into condenser, removed to prevent damages. Checked capacitor and contactor, tightened electrical connections. Ran ac and checked operation. Measured delta air temps at both coils. Measured amp draw of compressor, od fan, and blower. Unit is operating normal at this time. Customer signed up for SA. He also mentioned they will be interested in new furnace/AC after cooling season, would like to wait to get a quote.

Near Erion Ct, Bowie, MD 20721
Derrick S.

Derrick S.

installed new 50 gallon gas a.o smith water heater with ball valve pan and expansion tank

Near Ander Ct, Bowie, MD 20716
Derrick S.

Derrick S.

Snake kitchen drain and replace fill valve in hall bath toilet

Near Erion Ct, Bowie, MD 20721
michaelr@supremeairllc.com

michaelr@supremeairllc.com

Customer is collecting estimates will call in with decision tommorow and to schedule for Thursday

Near Ander Ct, Bowie, MD 20716
Derrick S.

Derrick S.

Customer called in on emergency line for busted water heater. When I called to tell customer I was en route and would be there in approx 40 min Customer stated he wants to cancel the service call

Near Gladys Retreat Cir, Bowie, MD 20720
Christopher A.

Christopher A.

Replace failed/ faulty temperature limit on blower housing. Temperature rise was normal but the temperature limit on th blower housing was opening we’ll below its rating and may close or it may not. I measured it at 89 degrees and it was still open. The part had failed. I checked for furnace over heating issues but there were none. Blower and coil were clean as well as the filter. I pulled the bottom off the unit and inspected the heat exchanger. No discoloration or cracks. In short the part had failed and was replaced. I checked the unit for proper operation and it operates normal. Customer used to have a service membership and re enrolled today. Therefore I waived the service fee and discounted the repair by 15%.

Near Ovalstone Ln, Bowie, MD 20715
Colin T.

Colin T.

Found flame sensor was dirty, locking out furnace. Quoted customer to clean and they approved. Cleaned flame sensor with sand paper and microfiber towel. Tested operation of unit. Explained service agreement to customer but they declined. Unit operating normal at this time. Customer asked for a written invoice. Check #1051 wouldn’t scan.

Near Marleigh Dr, Bowie, MD 20720
Daniel M.

Daniel M.

Found that when I turned the unit on the AUX heat would come right on . In heat pump the the supp,y temp was 89 and the return temp was 70 . When both Aux heat and heat pump would run the supply temp was 112 and return 70 . Aux heat pulling 39 amps . System is heating but changed settings in thermostat to allow stop the AUX heat from coming on unless there was a 2 degree diference in demand . Costumer understand he might have a little bit more run time out of the heat pump to save him run time with the AUX heat .

Near Hillmeade Station Dr, Bowie, MD 20720
Georgew@supremeairllc.com

Georgew@supremeairllc.com

Mrs Linda has scheduled for Next week November 27, 2018 when the A.C. Unit to be install. Ima do work on the spot for kitchen. She okayed the work over the phone with me and Chris. On today of November 27, had to install new, Moen kitchen faucet,1 1/2 swing p- trap, because of pipe was to long . Also the installment of new counter top measurements was off, which had to change. Found leak in supply valve that had to be tightened, which was leaking under kitchen sink.

Near Thackeray Ct, Bowie, MD 20720
Georgew@supremeairllc.com

Georgew@supremeairllc.com

Mrs Linda has scheduled for Next week November 27, 2018 when the A.C. Unit to be install. Ima do work on the spot for kitchen. She okayed the work over the phone with me and Chris.

Near Thackeray Ct, Bowie, MD 20720
Georgew@supremeairllc.com

Georgew@supremeairllc.com

Mrs Linda has scheduled for Next week November 27, 2018 when the A.C. Unit to be install. Ima do work on the spot for kitchen. She okayed the work over the phone with me and Chris.

Near Thackeray Ct, Bowie, MD 20720